Traditional Block Thursday: Pieced Star

PiecedStarMain_jpg_600x600_q85

Today’s tutorial features the beautiful Samantha line from Penny Rose Fabrics. We will be making a Pieced Star today. There are many variations to a pieced star.

DSC_0092_JPG_600x600_q85

I chose this one because it has the flying goose unit AND half square triangle units (a great review of how to make half square triangles).

1_jpg_600x600_q85 (16)

Start with two fabrics cut into the following pieces:

Fabric 1 (Tan): Four – 4″ squares, Four 3 1/2″ x 6 1/2″
Fabric 2 (Cream): Four 4″ squares, Eight 3 1/2″ squares

2_jpg_600x600_q85 (18)

Mark diagonal lines on the back of all of the cream squares: Four 4″ squares and eight 3 1/2″ squares.

3_jpg_600x600_q85 (15)

We are going to start by making the flying geese. This should also be a review if you’ve been sewing along with us. Place a 3 1/2″ cream square on the corner of the 3 1/2″ x 6 1/2″ tan rectangles. Stitch on the line.

4_jpg_600x600_q85 (16)

Trim 1/4″ from stitching to remove the corner.

5_jpg_600x600_q85 (16)

Press toward the corner.

6_jpg_600x600_q85 (15)

Place another 3 1/2″ cream square in the opposite corner of the 3 1/2″ x 6 1/2″ tan rectangle. Stitch on the line.

7_jpg_600x600_q85 (18)

Trim 1/4″ from stitching to remove the corner.

8_jpg_600x600_q85 (17)

Press toward the corner. Repeat to make four flying geese.

9_jpg_600x600_q85 (17)

Now we are going to move on to the half square triangles. With Right Sides Together (RST), place a 4″ marked cream square on the 4″ tan square. Stitch 1/4″ from the marked line.

10_1_jpg_600x600_q85

Turn the square around and stitch 1/4″ from the other side of the marked line. Repeat for all 4 squares.

11_jpg_600x600_q85 (18)

Cut on the line.

12_jpg_600x600_q85 (18)

Press the half square triangle toward the tan fabric.

13_jpg_600x600_q85 (17)

Trim two sides of the half square triangle, making sure to put your ruler’s diagonal line on the seam.

14_jpg_600x600_q85 (17)

Trim the remaining two sides. Trim to 3 1/2″ x 3 1/2″. Repeat to make sixteen half square triangles.

15_jpg_600x600_q85 (14)

Lay out all of your units to make your block.

16_jpg_600x600_q85 (16)

Stitch the four center half square triangles together to make a pinwheel.

17_jpg_600x600_q85 (15)

Press the pinwheel. Doesn’t matter which way your seams go on this one.

18_jpg_600x600_q85 (15)

Now your pieces should look like this.

19_jpg_600x600_q85 (14)

Stitch the three rows together.

20_jpg_600x600_q85 (9)

Press the rows. Again, it doesn’t matter which way you press as long as they are going opposite of the adjacent row. I pressed the top and bottom rows to the center, and the middle row to the outside.

21_jpg_600x600_q85 (10)

Here are your three rows ready to be put together.

DSC_0094_JPG_600x600_q85 (1)

Stitch the rows together and press. Finished block. Isn’t it beautiful?

23_jpg_600x600_q85 (7)

If you made blocks like this for an entire quilt, you might get something like this. It basically looks like a square in a square, alternated with pinwheels.

24_jpg_600x600_q85 (8)

But if you added sashing, it might help you to see where the block actually stops and starts.

25_jpg_600x600_q85 (3)

Of course, if you did a scrappy pieced star, you could definitely do it without sashing and it might look something like this.

BonnieSignature_1_jpg_300x300_q85 (3)

 

Unity_1_med_jpg_300x300_q85 (3)

A special thank you to our sponsor, Baby Lock, makers of our very favorite sewing machines!