• Home
  • /
  • Blog
  • /
  • Make it Modern Pillows – July Tutorial

Make it Modern Pillows – July Tutorial

It’s Jamie again from Sew Brainy Designs and I’m back with my 2022 Make it Modern Pillows series! This year I’m bringing you some fresh and bold modern quilt blocks that were designed specifically to be 18″ pillows! They are quick and easy, plus they’re a good way to bust your scrap stash or show off that designer RBD fabric that you love!

In case you missed it, June’s pillow used the Texture line and is a fun play on simple stripes. You can get that tutorial below!

July’s pillow uses squares to create playful confetti look.

These bright colors are so fun together! And talk about scrap friendly!

You could literally use any color combo! This one feels like a fun fiesta to me!

Here’s my usual matchstick quilting design using Aurifil 50wt. white thread.

This month’s pillow features Blossom Fabric by Christopher Thompson. Blossom is probably my favorite RBD basic. The colors options are fantastic and the random pattern hides seams perfectly! The colors I used (in order from left to right) were Aqua, Cranberry, Orange, Honey, and Raspberry.

And there are so many great colors of the Blossom line to choose from which is why I love it so much!

Now let’s make a pillow!


July Pillow Tutorial

Pattern Notes

  • Please read through all instructions before beginning.
  • Seam allowances are 1/4″ unless specified.
  • WOF = Width of Fabric; pattern assumes yardage is a minimum of 42″
  • RST = Right sides together
  • Press all seams open (or in preferred direction) unless specified.
  • Fat Quarter Precut (FQ) = 18″ × 21″
  • Fat Eighth Precut = 9″ × 21″

Material Requirements

For the block (pillow top):

This pattern uses (1) background fabric [FABRIC A] and (5) accent fabrics [FABRICS B-F]. Below are the requirements to make ONE 18″ block.

For the pillow body:

  • (1) 22-24″ square piece of muslin or other fabric (for quilting the top)
  • (1) 22-24″ square piece of batting (for quilting the top)
  • (2) 13″ × 18½” pieces of backing fabric (for the pillow envelope)
  • (1) 20″ pillow form (my favorite one to use is the FJÄDRAR from IKEA!)

Cutting Directions

Cut the fabric below in the specified order and label each cut with the letter/number in the [bracket].

From FABRIC A, cut:

  • (2) 3½” × 11″ rectangles [A3]
  • (2) 3½” × 5″ squares [A2]
  • (4) 3½” × 4¼” squares [A1]

From FABRIC B cut:

  • (1) 5″ square [B2]
  • (4) 4¼” squares [B1]

From FABRIC C, D, E, and F, cut:

  • (2) 4¼” squares [C1, D1, E1, F1]

Piecing Directions

1. Lay out (2) B1, (1) E1, (1) A1, and (1) C1 as shown below. Sew all pieces together into one strip and press seams. This will be the top row of the block.

2. Repeat STEP 1 using (2) B1, (1) D1, (1) A1, and (1) F1. This will be the bottom row of the block.

3. Lay out (1) F1, (1) A1, and (1) C1 as shown below. Sew all pieces together into one strip and press seams. This will be the left side of the block.

4. Repeat STEP 3 using (1) D1, (1) A1, and (1) E1. This will be the left side of the block.

5. Layout (2) A3, (2) A2, and (1) B2 as shown below to form the center block. Sew (1) A2 to the left and right sides of B2. Press seams.

6. Sew (1) A3 to the top and bottom. Press seams. Trim center block to 11″ if needed.

7. Lay out the center square, top row, bottom row, and the side rows as shown below. Sew the side rows on the center block. Press seams.

8. Sew on the top and bottom rows. Press seams.

9. Your block is now complete!

10. Layer the completed block on top of the 22-24″ batting and muslin squares and quilt the pillow top as desired. When you are done, trim the block to 18½”.

Note – if you add dense quilting like I did, your top may shrink a bit in size. Just trim it to the largest square that you can. You can trim the width of envelope backing fabric a bit in the next step if needed in order to match your actual top size.

11. Create a finished edge on the long side of each of the (2) 13″ × 18½” pieces of envelope backing by folding 1/2″ of fabric over the wrong side TWICE. Stitch a seam near the edge to secure it.

12. With the square top facing up, layer the envelope pieces RST on top of it as shown below and sew a 3/8″ seam around the edge of the pillow top.

13. Trim the edges of the corners a bit to reduce bulk. Turn the pillow case inside out and insert your pillow form. Your pillow is now done! Enjoy your fun modern make!

I can’t wait to see all the beautiful pillows everyone makes! They can be very addicting! Be sure to share them on social media! #makeitmodernpillows #iloverileyblake #sewbrainydesigns.

I’m also working on a 5-color version of all my blocks to make a sampler quilt. You can check out that post HERE on my blog. I’ll see you in July with some Blossom fabric and some squares!

Until later, happy quilting!

Jamie


Jamie is the creative brain behind Sew Brainy Designs. This self-proclaimed science nerd loves bright colors, big blocks, Mid-century modern design, and using as few seams as possible. Find all of her Make It Modern Pillows on the Riley Blake Designs blog!

Leave a Reply